Home BioBlog RickDaTech's Blog Electrostatic Separation
Perdón la construcción. Estamos traduciendo lo más rápido posible. Por favor ayúdenos informándonos de las malas traducciones o mala gramática o si sólo quiere hablar. Póngase en contacto con nosotros mediante correo electrónico a rick@make-biodiesel.org
Electrostatic Separation Imprimir Correo electrónico

Versión en español aún en construcción.


 


Doesn't seem to work for dewatering or cleaning WVO, unfortunately.

The glycerol is quite a light colour with biodiesel made from new sunflower oil.

Notice how the bottle shows no sign of separation at all, yet.

This technique works well on biodiesel made from high FFA oil too, and works with hot or cold biodiesel.

Here's another video using biodiesel made from waste cooking oil...

Guidelines on making high voltage source

Firstly, don't try any of this unless you are a trained electrical technician, familiar with the necessary safety precautions and procedures needed for working with high voltage. You need to protect yourself and those around you. I can't teach you what is necessary, so if you don't have a good understanding of this subject, don't try any of this.

A suitable supply can be made according to the general scheme below...

Current Limited HT Supply


Instead of having both lines current limited, you could have one earthed, and the other current limited with twice the number of resistors shown for one line.

How can we apply this to a biodiesel process?

There are a number of possible ways to do this. Again, I am offering ideas only, it is up to you to develop a scheme to suit your process.

Allow around 25mm per 1000V plate spacing
Do not allow the electrodes to enter the glycerol layer.

Do not allow the electrodes to be exposed to an air/methanol vapour mix. You can achieve this if you ensure the electrodes are always submerged. This is to prevent the possibility of an arc occuring in the explosive atmosphere.


For those more experienced in building high voltage equipment, these links may be of interest...

http://www.techlib.com/electronics/highvolts.html
http://home.earthlink.net/~jimlux/hv/cw1.htm
http://www.kronjaeger.com/hv/hv/src/mul/
http://www.blazelabs.com/e-exp19.asp
http://www.rmcybernetics.com/science/high_voltage/voltage_mult.htm

For more information on electrostatic separation of glycerin from biodiesel  see here

 

Related Links

Using High Voltage Current for Continuous Separation of glycerin and biodiesel - pdf From Piedmont Bioofuels Coop

 

Comentarios


Inicie sesión para enviar comentarios. Si no tienes una cuenta, usted puede inscribirse en uno.

How to make your own biodiesel at home

© Copyright 2008, 2009, 2010, 2011, 2012 Make Biodiesel dot Org- All Rights Reserved

 

¡ADVERTENCIA!

La producción de biodiesel requiere el uso de líquidos inflamables, tóxicos y cáusticos fuertes para hacer un combustible. No importa qué medidas de seguridad se ponen en marcha o el equipo que uso, la producción de biodiesel nunca será un pasatiempo seguro y puede poner usted, su propiedad y su familia en riesgo de sufrir lesiones o incluso la muerte. Producir Biodiesel a su propio riesgo.

 

En las Noticias

Escuela Secundaria de laboratorio Bio quemaduras
Clear Sky Biofuels Explota
Chicago explota planta de biodiesel

biodiesel más noticias....